HIKVISION TURBO HD TVI DS-2CE16D0T-IT3E 사용자 설명서 - 페이지 12
{카테고리_이름} HIKVISION TURBO HD TVI DS-2CE16D0T-IT3E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD TVI DS-2CE16D0T-IT3E 17 페이지. Turbo hd tvi bullet & turret camera
HIKVISION TURBO HD TVI DS-2CE16D0T-IT3E에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)
페이지 인쇄
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Tilt Position
[0° to 75°]
1). Hold the camera body, and rotate the enclosure
to adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
Purpose:
Call the menu by clicking button
interface, or call the preset No.95.
Steps:
1. Connect the camera with the TVI DVR, and the
monitor, shown as the figure 3-1.
2. Power on the analog camera, TVI DVR, and the
monitor to view the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking
the preset No. 95.
Figure 1-4 Secure the Camera
Figure 1-5 3-axis Adjustment
Menu Description
Figure 3. 1 Connection
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]
on the PTZ Control
button, or call