HIKVISION TURBO HD TVI DS-2CE16D0T-IT3E 사용자 설명서 - 페이지 8
{카테고리_이름} HIKVISION TURBO HD TVI DS-2CE16D0T-IT3E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TURBO HD TVI DS-2CE16D0T-IT3E 17 페이지. Turbo hd tvi bullet & turret camera
HIKVISION TURBO HD TVI DS-2CE16D0T-IT3E에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)
페이지 인쇄
2. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Note:
Cable hole is required when adopting ceiling outlet
to route the cable.
3. Attach the mounting base of the type I camera to
the ceiling and secure the camera with supplied
screws.
Figure 2. 5 Secure the camera to the ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall, expansion bolts are required to fix
the camera. For wooden wall, self-tapping screws
are required.
4. Route the cables through the cable hole (optional),
or the side opening.
5. Connect the corresponding power cord and video
cable.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle.
If not, adjust the camera according to the figure
below to get an optimum angle.
Figure 2. 4 Drill Template