Ganz YCH-03Am 사용 설명서 - 페이지 6

{카테고리_이름} Ganz YCH-03Am에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ganz YCH-03Am 8 페이지. Color/ digital day & night camera mechanical day & night camera

: When connecting the auto-

iris lens, turn off the camera power. Also, if

the auto-iris mode switch is set to a mode

other than "DC" or "VIDEO" that is set for the

connecting lens, the lens may be damaged.

DC :

To be set when using a non-amp

auto-iris lens.

AES :

To be set when using ﬁ xed iris

lens.

VIDEO: To be set when using an auto-iris

lens a built-in amp.

bn Video output connector

Connected to the TV monitor with a coaxial

cable.

bo Power input terminal

12V DC connection

24V AC connection

power supply marked class 2 or +12 V DC

power supply.

bp B/W Mode Fix terminal (ZC-NH258Nm)

The picture mode can be ﬁ xed at B/W by

shorting the two contacts on the B/W Mode

Fix terminal (for details, see the ﬁ gure on

page 4). Fixing the picture mode at B/W

can prevent the picture from having optical

oscillation, a phenomenon in which continuous

switching between color mode and B/W mode

occurs under infrared illumination.

Instructions when using an infrared lamp

Always check the brightness of an infrared

lamp which is to be used with this product.

Excessive infrared illumination may cause

optical oscillation. Refer to section ( bp ) above

and ﬁ x the picture mode at B/W in order to

avoid optical oscillation under excessive

infrared illumination.

EG-6

: Use only with a 24 V AC