Avantco 360CFM2LB 사용자 설명서 - 페이지 5
{카테고리_이름} Avantco 360CFM2LB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 360CFM2LB 7 페이지. Countertop display refrigerator & freezer, countertop refrigerator/freezer displays
페이지 인쇄
User Manual
Temperature Controls
• Refrigerant LED - Compressor is on
• Fan LED - Fan is on
• Defrost LED - Defrost cycle is running
Functions
Adjusting the Temperature for Digital Controls
Your new refrigerator or freezer is already factory-set to run at optimum temperatures for food
safety and should require no adjustments.
Freezers are set to cycle between a minimum temperature of -13°F and a maximum temperature
of 5°F. Adjusting the temperature changes the minimum temperature your unit will run at. Your unit
will not run constantly at this setting. To change it, follow these instructions:
Digital Control Units
• Hold "SET" for 1 sec. The display will flash the current minimum temperature.
• Use the arrow buttons to adjust the minimum temperature you want it to run at.
• Press "SET" again to save your settings.
Control
Always remember to calculate the differential if you change
the minimum temperature setting. The cabinet temperature
will fluctuate up to +7 degrees over your set minimum
temperature as the compressor runs and shuts off. Setting
set
the temperature too high will result in unsafe maximum
temperatures and possible health code violations.
Adjusting the Temperature for Dial Controls
The temperature controls are factory-set to maintain an average temperature of
34° to 45° F in refrigerators and -13 to 5° F in freezers. In refrigerators, to maintain
a different temperature, simply adjust the control knob located inside the unit. To
decrease the temperature (colder), turn clockwise. To increase the temperature
TEMP CONTROL
(warmer), turn counter-clockwise. In freezers, to maintain a different temperature,
simply adjust using the electronic control arrows. If you received a unit with the
Celsius controller, set the unit to -20.5° C to reach a temperature of -5° F. To set the
temperature press the set button, adjust the temperature accordingly by pressing
TOP LAMP
the up or down arrows, and then press set. This will ensure your freezer is
ON OFF
operating at a safe temperature for frozen foods.
- 5 -