HIKVISION TurboHD DS-2CE56F7T-IT Z Series 사용자 설명서 - 페이지 7

{카테고리_이름} HIKVISION TurboHD DS-2CE56F7T-IT Z Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TurboHD DS-2CE56F7T-IT Z Series 13 페이지.

8. Adjust the camera according to the figure below

to get an optimum angle.

1) View the camera image with the monitor.

2) Rotate the panning table to adjust the pan

direction.

3) Loosen the tilting lock screw.

4) Rotate the tilting table to adjust the tilt

direction.

5) Tighten the tilting lock screw.

6) Rotate the camera to adjust the lens to the

surveillance angle.

9. Tighten the screws to secure the bubble to the

back box/base plate.

Gently remove the protection film, which protects the

bubble during installation, from the bubble after the

installation is complete.

5.3

In-Ceiling Mounting

You must purchase an in-ceiling mount separately if

you use in-ceiling mounting.

5.3.1

1. Drill the screw holes and the cable hole in the

ceiling according to the supplied drill template.

2. Secure the in-ceiling mount with two screws as

shown below.

3. Route the cables through the in-ceiling mount

hole and connect the corresponding cables.

4. Affix the camera to the in-ceiling mount with the

supplied screws.

UM DS-2CE56(D/F)7T-xITxZ TurboHD Dome Camera (UD00351B) 022220NA

Figure 6, 3-Axis Adjustment

Figure 7, Install the Mount