HIKVISION TVI-AC334-VD4Z 사용자 설명서 - 페이지 5

{카테고리_이름} HIKVISION TVI-AC334-VD4Z에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TVI-AC334-VD4Z 10 페이지.

Figure 2-3 Fix the Mounting Base and Camera

5. Route the cables through the cable hole and

connect the video cables and power cord.

6. Secure the camera to the mounting base.

Figure 2-4 Fix the Camera to the Ceiling

7. Adjust the camera according to Figure 2-5 to get an

optimum angle.

1). Hold the camera body and rotate the enclosure

to adjust the pan angle [0° to 360°].

2). Move the camera body up and down to adjust

the tilt angle [0° to 75°].

3). Rotate the camera body to adjust the rotation

angle [0° to 360°].

Pan Position Range

[0°-360°]

Tilt Position Range

[0°-75°]

2.2 Installation of Type II Camera

2.2.1 Ceiling Mounting without Gang Box

Steps:

1. Disassemble the turret camera by rotating the

camera to align the notch to the clip plate, as shown

in Figure 2-6.

2. Pry the mounting base to remove the mounting

base with the camera body.

3. Attach the drill template (supplied) to the place

where you want to fix the camera, and then drill the

Figure 2-5 3-axis Adjustment

Figure 2-6 Disassemble the Camera

Rotation Position Range

[0°-360°]

Clip Plate

Notch