HIKVISION U1T Series 사용자 설명서 - 페이지 5
{카테고리_이름} HIKVISION U1T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION U1T Series 16 페이지. Turbo hd turret & dome camera
HIKVISION U1T Series에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)
페이지 인쇄
1.2.3 Overview of Type III Camera
Figure 1-3 Overview of Type III Camera
Note:
Press and hold the switch button for 5 seconds to switch the
video output. Four kinds of video outputs are available: TVI,
AHD, CVI, and CVBS.
1.2.4 Overview of Type IV Camera
Mounting Base
Pan Adjusting Screw
Tilt Adjusting
Screw
Figure 1-4 Overview of Type III Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with your
required output to avoid damage.
Make sure the wall is strong enough to withstand three
times the weight of the camera and the bracket.
If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use self-
tapping screw to secure the camera.
If the product does not work properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
Mounting
Base
Clip Plate
Enclosure
Main Body
Bubble
Switch
Button
Power Cord
IN
DC 12 V
Video
Cable
Video Cable
Switch
Button
Safety
Rope
Power
Cord