KitchenAid KDFX 6050 제품 시트 - 페이지 10
{카테고리_이름} KitchenAid KDFX 6050에 대한 제품 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KDFX 6050 16 페이지.
페이지 인쇄
c. How to set the water hardness level
- Press and hold the programme selection button and the Cancel/Off button for at least three seconds.
- The hardness level set is shown on the display or the LEDs for programmes 1 - 3 indicate the water
hardness setting according to the table below.
- With each successive touch of the programme selection button, the setting increases and when it
reaches 7 it returns to 1 again.
- Press and hold the START button or wait 30 seconds for the setting to be saved!
Hardness in
Water
German
hardness
degrees °dH
Soft
Average
Average
Medium-hard
Hard
Very Hard
Extremely Hard
The factory setting for water hardness is 4 for medium-hard water (display 4 or programme 3 LED
lights up).
Water hardness level 4 with combined action detergent
Even if you use tablets which include salt functionality, you must still add regeneration salt. They
are not effective enough at softening hard water. If the appliance is equipped with the "Set
detergent type" function (see page 4) and this function has been selected, the salt indicator remains
on starting from water hardness level 5.
Hardness in
French
degrees °fH
0 - 5
0 - 9
6 - 10
10 - 18
11 - 15
19 - 27
16 - 21
28 - 37
22 - 28
38 - 50
29 - 35
51 - 63
36 - 50
64 - 90
Hardness in
Setting/
English
Indication on the
degrees °eH
display
0 - 6.3
7 - 12.6
13.3 - 18.9
19.6 - 25.9
26.6 - 35
35.7 - 44.1
44.8 - 62.4
10
Programme LED
indicator
P1
P2
1
2
3
4
5
6
7
P3