KitchenAid KDIX 8810 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} KitchenAid KDIX 8810에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KDIX 8810 12 페이지.

Installation instructions

1. Unscrew two bolts (A) and remove GFCI cover

(B) located on the front base of the dishwasher

inside the cabinet.

2. Make sure that indicator (D) is in "1" position.

3. Turn on dishwasher if it is off – press main

switch (C) to "on" position (LED's are lighting).

4. Press TEST button (E). Indicator should switch

into "0" position. If it does not dishwasher can

not be used – contact service immediately.

5. Switch back indicator into "1" position.

6. Place GFCI cover and screw down two bolts.

Check operation

• Refer to the "Instruction For Use" booklet that

came with this dishwasher and run the

dishwasher through a complete cycle.

• Check for leaks.