Avantco NP2R-SWMT 사용자 설명서 - 페이지 5

{카테고리_이름} Avantco NP2R-SWMT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco NP2R-SWMT 6 페이지.

REGULAR MAINTENANCE

CLEANING THE CONDENSER COIL

■ For efficient operation, it is important that the condenser surface be kept free

of dust, dirt, and lint.

■ We recommend cleaning the condenser coil and fins at least once per month.

■ Clean with a commercial condenser coil cleaner, available from any kitchen

equipment retailer. Brush the condenser fins from top to bottom, not side to

side.

■ After cleaning, straighten any bent condenser fins with a fin comb.

CLEANING THE FAN BLADES AND MOTOR

If necessary, clean the fan blades and motor with a soft cloth. If it is necessary to

wash the fan blades, cover the fan motor to prevent moisture damage.

CLEANING THE INTERIOR OF UNIT

■ When cleaning the cabinet interior, use a solvent of warm water and mild

soap.

■ Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may

damage the stainless steel surface.

■ Wash door gaskets on a regular basis, preferably weekly. Simply remove door

gasket from the frame of the door, soak in warm water and soap for thirty (30)

minutes, dry with soft cloth, and replace.

■ Check door gaskets for proper seal after they are replaced.

■ Periodically remove the shelves and pilasters from the unit and clean them

with mild soap and warm water. To remove the pilasters, first remove the

shelves and shelf brackets. Then, simply lift the pilaster up and out.

Disconnect power cord before cleaning any parts of the unit.

Before requesting any service on your unit, please check the following points.

Please note that this guide serves only as a reference for solutions to common

problems.

WARNING

TROUBLE SHOOTING