DecoRad HandMate UV600 사용자 설명서 - 페이지 15
{카테고리_이름} DecoRad HandMate UV600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DecoRad HandMate UV600 17 페이지. Ultimate tool for instantly curing uv (floor) coatings
DecoRad HandMate UV600에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지)
페이지 인쇄5. Error messages, shown on the display
Error
Description
E14 (TEMP)
Over-temperature
E15 (FAN)
Fan fail
E16 (SHUT)
Shutter error
E17
Temperature sensor
U51 (DIST)
Distance
U94 (TIME)
Time management
Solution
The UV lamp is too hot, leave the UV lamp 5 minutes to cool down. Turn
off the Handmate.
Follow the start procedure.
Please consult DecoRad® Systems in case of recurrence.
Leave the UV lamp 5 minutes to cool down, turn off the Handmate.
Follow the start procedure.
Please consult DecoRad® Systems in case of recurrence.
Leave the UV lamp to cool down, turn off the Handmate.
Follow the start procedure.
Please consult DecoRad® Systems in case of recurrence.
Leave the UV lamp to cool down, turn off the Handmate.
Follow the start procedure.
Please consult DecoRad® Systems in case of recurrence.
Please position the Handmate between 2 – 4 cm distance from the floor
UV curing is only possible at this distance.
Auto OFF after 5 minutes no use
Handmate UV 600 v. 2.4
15