Berner AE08 설치 및 유지 관리 지침 매뉴얼 - 페이지 11
{카테고리_이름} Berner AE08에 대한 설치 및 유지 관리 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Berner AE08 16 페이지.
페이지 인쇄
STEP ONE
STEP TWO
+
Standard Mode of Operation Options:
OFF
ON
AUTO
PLUS
For heated units only
Customizable Mode of Operation Options:
See
www.berner.com/intelliswitch
(Section 5, Program Menu).
STEP THREE
To Start: Press the down arrow button once.
NOTE: To change from "Mode" to "Fan Speed" press the down arrow twice.
+
Use the
buttons to scroll through the available modes of operations.
Door opens: The air curtain is off.
Door shuts: The air curtain is off.
Door opens: The air curtain activates immediately when mode is selected.
Door shuts: The air curtain continues to run.
Door opens: The air curtain activates.
Door shuts: The air curtain turns off, after time delay expires.
Door opens: The air curtain and heater (if temperature is below thermostat setting)
activate and run at set speed.
Door shuts: The air curtain turns off after the time delay expires. If thermostat is not
satisfied, air curtain and heater continue to run until the thermostat is satisfied. If the
thermostat drops below set temperature, the heater and air curtain will activate and run
on a low speed until the thermostat is satisfied.
for programming directions
Once the Mode of Operation is selected, press the
Berner International
www.berner.com
111 Progress Ave. / New Castle / PA / 16101 / USA
800.245.4455
-11-
button.