DecoRad HandMate UV600 사용자 설명서 - 페이지 13
{카테고리_이름} DecoRad HandMate UV600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DecoRad HandMate UV600 17 페이지. Ultimate tool for instantly curing uv (floor) coatings
DecoRad HandMate UV600에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지)
페이지 인쇄Handmate UV 600 v. 2.4
4.1 STARTING THE JOB
Press the ON button
The indicator will burn
On the display of the handunit the tekst DONE will appear.
Press
the
button
with
the
"lamp
symbol"
On the display of the lamp unit the text WAIT will be shown
As soon as the lamp is warm, the text DIM will be shown
in the display.
DISTANCE BETWEEN LAMPUNIT AND SURFACE: 2 –
4 CENTIMETERS
Use the button on the lampunit or the extension handle to
open the shutter and to start UV curing. The text FULL will
be shown on the display.
DIST = distance to surface is not correct, a beeping signal
can be heard.
On the bottom of the lamp unit a shutter will slide in front
of the UV bulb, UV curing is not possible any longer.
Move the lamp unit in a position between 2 – 4 centimeters
from the surface. DIM will be shown on the display. The
lamp can go to FULL and curing can be started again.
13