Avantco 177AG24MG 설치 운영 및 유지보수 - 페이지 6

{카테고리_이름} Avantco 177AG24MG에 대한 설치 운영 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 177AG24MG 17 페이지. Manual griddles, radiant charbroilers, hot plates

Instructions are for conversion from Natural Gas to Propane (L.P.) on all models. The

conversion should be done before connecting the unit to the gas supply.

Units are shipped from the factory equipped for use on natural gas. Orifices necessary for LP

(propane) are provided in a bag tied to the valve on the front panel.

1. Remove the trivets from the top

of the appliance.

2. Remove the burner from the top

of the gas pipe.

3. Replace the orifice fittings into

the valve. Note: Unit Number on

side of orifice fittings.

4. Install the front panel knobs.

5. Before installing the regulator,

unscrew the octagonal cap,

up you can read (NAT) on the

plastic insert out of the cap, flip

it over and snap back in.

6. Continue with installation.

Page |

CONVERSION

Orifice Fittings

Regulator with Brass Cap

L.P Position of Insert

Plastic Insert