GREEN SERIES FITNESS CIR-TM7000-G 업그레이드 절차 - 페이지 10

{카테고리_이름} GREEN SERIES FITNESS CIR-TM7000-G에 대한 업그레이드 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. GREEN SERIES FITNESS CIR-TM7000-G 20 페이지. Suspension upgrade procedure

페이지 인쇄

2.12.

After completing step 2.11, reattach the 8mm x 40mm Philips head bolt back into front row #1

suspension with clip. Tighten to estimated 20 lbs of torque. Note: Make sure to use blue Loctite on

end of bolts.

2.13.

Go to rear of treadmill and take off both LT & RT rear deck Philips head 8mm x 30mm bolts. Pry

up the deck without damage at least 1" and secure with item like plastic or rubber handle wrench.

CAUTION: INJURY TO FINGERS AT THIS POINT WHEN NOT BEING CAREFULL.

www.GreenSeriesFitness.com

©December 2014

Call Toll free at (800) 269-7130