2M Technology 2MTHWT-HMD 사용자 설명서 - 페이지 16

{카테고리_이름} 2M Technology 2MTHWT-HMD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 2M Technology 2MTHWT-HMD 20 페이지. Walkthrough metal detector
2M Technology 2MTHWT-HMD에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지), 빠른 매뉴얼 (12 페이지)

페이지 인쇄

Walkthrough Metal Detector with Single Wrist Thermal Sensor 2MTHWT-HMD

2. If the alarm failure still exists though the oscillation signal is normal, the DC power values of the motherboard shall be

checked for being +8V, -8V and +12V respectively with a multimeter.

3. If the DC power values of the motherboard are +8V, -8V and +12V, the reference voltage shall be checked for being

3.6V with a multimeter.

4. If the reference voltage is 3.6V, the 3rd-pin DC voltage of Q21 and Q25 of the motherboard shall be checked for being

close to -8V and OV respectively with a multimeter.

V. Wiring diagram of circuit board:

Mother Board + Switch power supply + Zone LED PCB + Keyboard PCB + Speaker

STANDARD COMPLIANCE

This product meets the Technical Code for GB15210-2003 Walk-through Metal Detector (WTMD).