decorflame QC210-BK 사용 설명서 - 페이지 5

{카테고리_이름} decorflame QC210-BK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. decorflame QC210-BK 6 페이지. Electric stove heater

WARNINg

Disconnect power and unplug the power cord

before attempting any maintenance or clean-

ing to reduce the risk of fire, electric shock

or personal injury. The bulbs in your unit can

become extremely hot. Allow at least 10 min-

utes between turning off the unit and removing

the light bulbs to avoid the accidental burning

of the skin.

The fire effect is created with the use of a 40

watt b-10 candelabra light bulb with an E-12

(small) socket base. The light bulb will have

to be replaced from time to time when they

burn out.

During normal operation the stove heater will

always give you simulated flame function. If

the intensity of flame suddenly increases, it

means that the light bulb is going to burn out.

Replace the light bulb immediately according

to the instruction and do not operate the stove

heater when the light bulb burns out or without

the light bulb.

M A I N T E N A N C E

CHANgINg THE

LIgHT bULb

STEP 1: Open the door of unit with the handle.

STEP 2: Loosen the 2 screws at the front of the

log set inside the stove. Carefully lift the logset

up far enough to access the light bulbs. You

will find 1 X 40W Type b-10 candelabra light

bulb with E-12 socket base at the bottom.

STEP 3: Replace the burned out light bulb

using a new 40 watt Type b-10 candelabra light

bulb.

STEP 4: Reinstall the logset.

STEP 5: Plug in the unit.