IKEA tradfri 매뉴얼 - 페이지 4

{카테고리_이름} IKEA tradfri에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA tradfri 12 페이지. Motion sensor
IKEA tradfri에 대해서도 마찬가지입니다: 사용자 설명서 (36 페이지), 조립 지침 매뉴얼 (36 페이지), 조립 지침 매뉴얼 (24 페이지), 매뉴얼 (12 페이지), 매뉴얼 (28 페이지), 매뉴얼 (20 페이지), 매뉴얼 (16 페이지), 매뉴얼 (20 페이지), 빠른 매뉴얼 (36 페이지), 매뉴얼 (16 페이지), 매뉴얼 (32 페이지), 매뉴얼 (12 페이지), 매뉴얼 (8 페이지), 매뉴얼 (24 페이지), 매뉴얼 (24 페이지), 매뉴얼 (32 페이지), 매뉴얼 (24 페이지), 매뉴얼 (32 페이지), 매뉴얼 (32 페이지), 매뉴얼 (24 페이지), 매뉴얼 (24 페이지), 매뉴얼 (24 페이지), 매뉴얼 (24 페이지), 매뉴얼 (29 페이지), 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (12 페이지), 매뉴얼 (40 페이지), 빠른 시작 매뉴얼 (24 페이지), 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (16 페이지), 매뉴얼 (24 페이지), 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (40 페이지), 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (36 페이지), 매뉴얼 (28 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (32 페이지), 매뉴얼 (32 페이지), 매뉴얼 (24 페이지), 사용 설명서 (8 페이지), 매뉴얼 (24 페이지), 빠른 시작 매뉴얼 (4 페이지), 매뉴얼 (8 페이지), 매뉴얼 (20 페이지), 매뉴얼 (12 페이지), 매뉴얼 (8 페이지), 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (4 페이지), 매뉴얼 (48 페이지)

페이지 인쇄
IKEA tradfri 매뉴얼
ENGLISH
WIRELESS OPEN/CLOSE REMOTE
FUNCTIONS
UP:
Press to move your wireless roller blind
up..
DOWN:
Press to move your wireless roller blind
down.
Pairing: Add IKEA Home smart products
to your system. See instructions below.
IMPORTANT NOTE: You need the Signal
Repeater to be able to steer your blinds with
the wireless Open/Close remote!
ADDING DEVICES TO YOUR
WIRELESS OPEN/CLOSE REMOTE
When the wireless Open/Close remote is
sold together with a wireless roller blind and
a Signal Repeater (in the same package),
they are already paired.
To add more wireless roller blinds, just
repeat the steps below:
Make sure that your wireless roller blind is
turned on.
1 Open the back cover of the Open/Close
Remote and find the pairing button.
2 Short press on both buttons on the blind.
This will make the device awake and
ready for pairing for 2 minutes.
3 Hold the Open/Close remote very close to
the wireless roller blind you want to add:
no more than 5 cm away from
4 Press and hold the pairing button for at
least 10 seconds on the wireless Open/
Close remote.
5 A red light will shine steadily on the
Open/Close remote. On your wireless
roller blind a white light will begin to dim
and flash until the devices have been
successfully paired.
Up to 4 wireless roller blinds can be paired
with 1 Open/Close remote.
Make sure to pair them one at a time. If
you have difficulties paring multiple blinds,
temporarily disconnect those that have
already been paired by removing the battery
cell inside. This will help with the pairing
process.
USING YOUR WIRELESS
ROLLER BLINDS
Move blind up to top position using
Open/Close remote
Press the up button once (short press) on
the Open/Close remote
Move blind down to preset level using
Open/Close remote
Press the down button once (short press)
on the Open/Close remote
Move up blind using Open/Close
remote
Press and hold the up button on the Open/
Close remote
While pressing the button the blind is
raised (until wished position or top position
has been reached), if the button is release
the blinds stop.
Move down blind using
Open/Close remote
Press and hold the down button on the
Open/Close remote
While pressing the button the blind is
lowered (until wished position or max has
been reached), if the button is release the
blinds stop.
Move blind up to top position
using buttons on Blind.
Single press the Upper (Top) button on
the Blind until blind has reaches the top
position.
.
Move blind down to preset level
using buttons on Blind.
Single press the Bottom (Lower) button on
the Blind until blind has reaches the bottom
position.
Move up blind using buttons on Blind.
Press and hold the Upper (Top) button on
the Blind.
Move down blind using
buttons on Blind.
Press and hold the Bottom (Lower) button
on the Blind
4