Avantco 178CBE36HC 사용자 설명서 - 페이지 12

{카테고리_이름} Avantco 178CBE36HC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 178CBE36HC 12 페이지. Refrigerated chef bases
Avantco 178CBE36HC에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)

페이지 인쇄

User Manual

Refrigerated Chef Bases

Troubleshooting

Problem

Possible Solution

Fuse blown or circuit breaker tripped

Replace fuse or reset circuit breaker.

Power cord unplugged

Plug in power cord.

Compressor is not running

Thermostat set too high

Set thermostat to lower temperature.

Cabinet in defrost cycle

Wait for defrost cycle to finish.

Excessive amount of warm product placed in cabinet

Allow adequate time for product to cool down.

Dirty condenser oil

Condensing units run for

Clean the condenser coil.

long periods of time

Evaporator coil iced over

Unplug unit and allow coil to defrost. Make sure thermostat is not set too

cold.

Thermostat set too warm

Set thermostat to lower temperature.

Airflow blocked

Re-arrange product to allow for proper air flow. Make sure there is at

least four inches of clearance from evaporator.

Excessive amount of warm product placed in cabinet

Allow adequate time for product to cool down.

Cabinet temperature

Fuse blown or circuit breaker tripped

is too warm

Replace fuse or reset circuit breaker.

Dirty condenser coil

Clean the condenser coil.

Evaporator coil iced over

Ensure doors are closed when not in use.

Low refrigerant levels

Contact a service technician to check refrigerant levels.

Condensation is collecting on

Relative humidity is above 60%

the cabinet and/or floor

Move unit to area below relative humidity or lower humidity level.