Gaobiao F500 사용자 설명서 - 페이지 10

{카테고리_이름} Gaobiao F500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaobiao F500 18 페이지. Smart thermostat

NO.5

Functions & Settings

Set WIFI

Press Menu, then the screen displays DATE TIME, then press Next twice, then the screen displays SETUP

WIFI, then press Edit, the screen displays SMART MODE, press UP or DOWN arrow to switch between

SMART MODE and AP MODE. After setting, press Done to exit. Then the WIFI icon on the screen will be

blinking.

Note: For SMART MODE, the user will only need to input the WIFI password.

For AP MODE, the user will need to select the WIFI network first and then input password.

When the WIFI icon on the thermostat is blinking, open the APP-Plus Thermostat

THERMOSTAT' in Google Play or APP Store to download the APP, get registered with phone number or

e-mail and log in) on the user's phone.

l Press + on the right upper corner of the APP to bind a thermostat to the APP.

l Then confirm the WIFI icon on the thermostat is blinking (Fig.1)

l Input the WIFI network password to configure WIFI signal for the thermostat. (Fig.2) The connection will

need about 30seconds (Fig. 3), if failed to connect, please try again. If failure more than 3 times, please

check if the WIFI network is good. After connected successfully, the APP will show the main interface. (Fig. 4)

(Search 'PLUS