IKEA 005.089.99 매뉴얼 - 페이지 13
{카테고리_이름} IKEA 005.089.99에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA 005.089.99 32 페이지.
페이지 인쇄
ENGLISH
The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically
released during the hot rinse phase.
When the rinse aid chamber is empty, the
rinse aid indicator is turned on notifying to
refill rinse aid. If the drying results are
satisfactory while using multi-tablets only, it
is possible to deactivate the notification for
refilling rinse aid. However, for best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
End sound
You can activate an acoustic signal that
sounds when the programme is completed.
Acoustic signals sound also when
a malfunction of the appliance
occurs. It is not possible to
deactivate these signals.
AutoOpen
AutoOpen improves the drying results with
less energy consumption. The appliance
door opens automatically during the drying
phase and remains ajar.
AutoOpen is automatically activated with all
programmes other than Rinse & Hold.
Caution! Do not try to close the
appliance door within 2 minutes
after automatic opening. This can
cause damage to the appliance.
Caution! If children, pets or
people with disabilities have
access to the appliance,
deactivate AutoOpen. The
automatic opening of the door
may pose a danger and expose
possible hazards inside the
appliance (such as knives, sharp
objects, chemicals).
Key tones
The buttons on the control panel make a
click sound when you press them. You can
deactivate this sound.
Setting mode
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode
while the programme is running.
To enter setting mode, press and hold
simultaneously
seconds.
• The light related to
indicator
• The indicators
• The lights related to the programme
buttons are on.
How to navigate in setting mode
You can navigate in setting mode using
programme buttons.
and
for about 3
and the
flash.
,
and
are on.
13