IKEA 504.756.18 매뉴얼 - 페이지 19
{카테고리_이름} IKEA 504.756.18에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA 504.756.18 36 페이지.
페이지 인쇄
ENGLISH
2. Press the button dedicated to the option
you want to activate.
• The light related to the button is on.
• The display shows the updated
programme duration.
By default, options must be
activated every time before you
start a programme.
If the latest programme selection
is enabled, the saved options are
activated automatically along with
the programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other.
Activating options often increases
the water and energy
consumption as well as the
programme duration.
How to select and start the
programme AUTO
1. Press
• The light related to the button is on.
• The display shows the programme
duration.
2. Close the appliance door to start the
programme.
The appliance senses the type of load and
adjusts a suitable wash cycle. During the
cycle, the sensors operate several times and
the initial programme duration can
decrease.
How to delay the start of a
programme
1. Select a programme.
2. Press
repeatedly until the display
shows the desired delay time (from 1 to
24 hours).
The light related to the button is on.
.
3. Close the appliance door to start the
countdown.
During the countdown, it is not possible to
change the delay time and the programme
selection.
When the countdown is complete, the
programme starts.
How to cancel the delay start while
the countdown operates
Press and hold
for about 3 seconds.
The appliance returns to the programme
selection.
If you cancel the delay start, you
have to select the programme
again.
How to cancel a running programme
Press and hold
for about 3 seconds.
The appliance returns to the programme
selection.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the door,
the appliance continues from the point of
interruption.
If the door is opened for more
than 30 seconds during the
drying phase, the running
programme ends. It does not
happen if the door is opened by
AutoOpen function.
The Auto Off function
This function saves energy by switching the
appliance off when it is not operating.
19