IKEA DISKAD 사용 설명서 - 페이지 14
{카테고리_이름} IKEA DISKAD에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA DISKAD 50 페이지.
IKEA DISKAD에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 매뉴얼 (16 페이지), 매뉴얼 (45 페이지), 매뉴얼 (37 페이지)
en Water softening system/special salt
Using special salt
Top up the special salt as soon as the
salt refill indicator @ lights up in the
control panel. Always top up the special
salt immediately before switching on the
dishwasher. This ensures that overrun
special salt solution is immediately
rinsed out and that corrosion in the
washing tank cannot occur.
Caution!
Detergent will destroy the water
softening unit! Never pour detergent into
the dispenser for special salt.
Top up the special salt as follows:
Undo the screw plug on the
1.
dispenser 1b.
Fill the dispenser with water
2.
(required only when switching on the
appliance for the first time).
Add special salt as illustrated (do
3.
not use table salt or tablets).
The water is displaced and runs out.
*Depending on the features of your
dishwasher
14
Using detergents with salt
replacement substances
A ccording to the manufacturers,
D e t e r g e n t s w i t h s a l t r e p l a c e m e n t s u b s t a n c e s
detergents with salt replacement
substances can only be used up to a
specific degree of hardness (usually
21° dH, 37° fH, 26° Clarke,
3.7 mmol/l) if no special salt is added.
For optimum cleaning and drying
results, we recommend using special
salt from a water hardness of 14° dH
(25° fH, 17° Clarke, 2.5 mmol/l).
Switching off salt refill
indicator/water softening unit
I f the salt refill indicator @ bothers
S w i t c h i n g o f f w a t e r s o f t e n i n g u n i t
you (e.g. if you are using a combination
detergent with a salt component), you
can switch off the salt refill indicator.
Proceed as described under "Setting
water softening unit" and set the value
to :
. The water softening unit and
the salt refill indicator are switched off.