HIKVISION DS-2CD7153-E 설치 매뉴얼 - 페이지 11

{카테고리_이름} HIKVISION DS-2CD7153-E에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CD7153-E 17 페이지. Network mini dome camera
HIKVISION DS-2CD7153-E에 대해서도 마찬가지입니다: 설치 매뉴얼 (18 페이지), 빠른 매뉴얼 (18 페이지), 기술 매뉴얼 (5 페이지)

페이지 인쇄

Installation Manual of Network Mini Dome Camera

Loosen the lens set screws

NOTE：

 As the lens of camera has

already been factory adjusted

to the best imaging effect,

thus it only needs to adjust

the pan and tilt view angle.

 If the image is not clear

without the back box, please

don't worry, the back box will

affect the imaging effect, so

when you test the imaging

effect of lens, the back box

must be installed to the

camera

4. Install the back box, and tighten the set screws.

Insert the hexagonal screw driver into the hole

marked in the picture , and then adjust

horizontally and vertically the camera's pan and

tilt by turning the hexagonal screw driver

Tighten the lens set screws