HIKVISION DS-2CE79U8T-IT3Z 사용자 설명서 - 페이지 6
{카테고리_이름} HIKVISION DS-2CE79U8T-IT3Z에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE79U8T-IT3Z 16 페이지. Turbo hd 4k series vf bullet & turret & dome camera
HIKVISION DS-2CE79U8T-IT3Z에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지)
페이지 인쇄
Figure 2-2 Fix the Camera to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall, expansion bolts are required to fix
the camera. For wooden wall, self-tapping screws
are required.
5. Connect the corresponding power cord, and video
cable.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the surveillance angle.
1) Loosen the No.① adjusting screw to adjust the
pan position [0° to 360°]. Tighten the No.①
adjusting screw.
2) Loosen the No.② adjusting screw to adjust the
tilting position [0° to 90°]. Tighten the No.②
adjusting screw.
3) Loosen the No.③ adjusting screw to adjust the
rotation position [0° to 360°]. Tighten the No.③
adjusting screw.
2.1.2 Ceiling/Wall Mounting with
Before you start:
You need to purchase a junction box first.
Steps:
1. Paste the junction box's drill template on the
ceiling/wall.
2. Drill screw holes, and the cable hole (optional) in
the ceiling/wall according to the holes of the drill
template.
Note:
Drill the cable hole, when adopting ceiling outlet to
route the cable.
3. Take apart the junction box, and align the screw
holes of the bullet camera with those on the
junction box's cover.
4. Fix the camera on the junction box's cover.
Figure 2-3 3-axis Adjustment
Junction Box