IKEA KALLBODA 매뉴얼 - 페이지 13

{카테고리_이름} IKEA KALLBODA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA KALLBODA 16 페이지.

페이지 인쇄

Additional functions

You can find an overview of the additional functions that can

Additional functions

be set here.

ADDITIONAL FUNCTIONS

Quick Plus

Half Load

Handling problems

If you have a problem with your appliance, refer to the

"Troubleshooting" section in the full version of the user

manual, which is available on the following pages:

www.ikea.com.

Technical specifications

Dimensions (HxWxD)

Weight

Voltage

Power rating

Fuse

Water pressure

Inlet rate

Water temperature

Capacity

You can find more information about your model online at

https://eprel.ec.europa.eu/. This web address is linked to the

official EU EPREL product database. Please then follow the

instructions on searching for the models. The model identi-

fier is made up of the model name and article number

without dots. This information can be found on the label on

the right side of the appliance door.

Note: To save energy and water, load the machine with the

maximum number of place settings specified.

USE

The run time is shortened

●

by 15% to 75% depending

on the rinse programme.

Energy and water con-

●

sumption are increased.

Switch on with small

●

loads.

It is recommended

●

adding less detergent to

the detergent dispenser

than for a full machine

load.

The run time is

●

shortened.

Energy and water con-

●

sumption are reduced.

865 x 598 x 550 mm

Max.: 60 kg

220 - 240 V, 50 Hz or 60 Hz

2000 - 2400 W

10 - 16 A

Min. 0.05 MPa (0.5 bar)

●

Max. 1 MPa (10 bar)

●

Min. 10 l/min

Cold water.

Hot water max.: 60 °C

14 place settings

To download the full document, visit www.ikea.com

ADDITIONAL FUNCTIONS

ExtraDry

IntensiveZone

Information regarding free and open

source software

This product includes software components that are li-

censed by the copyright holders as free or open source soft-

ware.

This licence information can be downloaded via our home

page www.ikea.com. Alternatively, you can request relevant

information from [email protected].

The source code will be made available to you on request.

Please send your request to the above address. Subject:

"FOSS"

USE

For a better drying result

●

the final rinse temperat-

ure is increased and the

drying phase extended.

Especially suitable for dry-

●

ing plastic parts.

There is a slight increase

●

in energy consumption

and the run time is exten-

ded.

Switch on with mixed

●

loads containing table-

ware with different soil-

ing levels, e.g. place very

soiled pots and pans in

the bottom basket and

normally soiled tableware

in the upper basket.

The spray pressure in the

●

bottom basket is in-

creased and the max-

imum programme tem-

perature held longer. This

will increase the run time

and energy consumption.