AFS AFS5001-2CRX 설치 및 작동 지침 - 페이지 11
{카테고리_이름} AFS AFS5001-2CRX에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AFS AFS5001-2CRX 15 페이지. Afs5001 series fiber optic video & data & ethernet transmission system 1-ch video bi-directional data 10/100 mbps ethernet transceiver
페이지 인쇄1-Ch. 8 BIT DIGITAL VIDEO + BI-DIRECTIONAL DATA + 10/100MBPS ETHERNET ON 1 FIBER
8.0 Front Panel LED Indicators
Both the Transmitter (TX) and Receiver (RX) cards have front panel mounted indicators to
provide visual operational status of the card and each of the channels. Below are listed and
described the functions of the various LED indicators. When an active video source is connected
to any one of the input channels, the Video LED will turn ON. When the receiver is connected to
the transmitter via fiber, the corresponding channel Video LED will also illuminate.
Figure 8.1: Led
indicators of TX rear
panel
Alba Fiber Systems Inc. Specifications are subject to change without notice. Page 11 9/27/12
www.albafiber.net
LED STATUS INDICATORS
LINK – OPTICAL CONNECTION PRESENT (ON)
OPTICAL CONNECTION ABSENT (OFF)
STATUS INDICATORS
V1 - VIDEO PRESENT (ON)
VIDEO ABSENT (OFF)
DATA INPUT/OUTPUT
STATUS INDICATORS
DTX – DATA ABSENT (OFF)
DATA INPUT/OUTPUT NORMAL (FLASHING)
DATA ERROR (OFF)
DRX – DATA ABSENT (OFF)
DATA INPUT/OUTPUT NORMAL (FLASHING)
DATA ERROR (OFF)
ETHERNET INPUT/OUTPUT
STATUS INDICATORS
Indicator
Status
10/100M
ON
10/100M
OFF
Link/ACT
ON
Link/ACT
OFF
POWER INPUT/OUTPUT
STATUS INDICATORS
PWR –POWER UP (ON) / POWER DOWN (OFF)
Series AFS5001
AFS5001-TX
VIDEO INPUT
Description
Active transmitting/receiving at 100 Mbps
Active transmitting/receiving at 10 Mbps
Active Optic Signal;
Active data connection (Flashing)
Data signal absent