Avantco 177SL612A 사용자 설명서 - 페이지 7

{카테고리_이름} Avantco 177SL612A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 177SL612A 18 페이지. Meat slicer
Avantco 177SL612A에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지)

페이지 인쇄

Only use hot water and a biodegradable detergent for dishes with a 7-8 PH,

at a temperature of no lower than 30° C or(86° F) using a soft, spongy cloth and a

semi-rigid nylon brush for the plate and the sharp food press.

The sanitizer concentration shall comply with Section 4-501.114, Manual and

Mechanical Warewashing Equipment, Chemical Sanitization – Temperature, pH,

Concentration, and Hardness of the FDA Food Code.

recommend using USDA approved sanitizer

If a chemical sanitizer other than chlorine, iodine or quaternary ammonium is used, it

shall be applied in accordance with the EPA-registered label use instructions.

: For cleaning the sharp areas of the plates, the food press and the

blade, we recommend using protective gloves.

Rinse well with a lot of hot clean water and dry with a soft cloth or a spongy

material. Do not clean the slicer with water or stream jets or similar methods.

Clean all the removed parts using a cloth and a cleaning solution. Rinse with hot

water. Sanitize and let air dry.

Clean the sharpener cover with water and detergent. Carefully clean the

sharpener assembly and around the stones.

assembly

Each

time

the

sharpener

examined for cleanliness. Turn off the slicer, close the gauge plate, unplug power

cord and open the sharpener cover.

If there is evidence of fatty or metallic build-up in the stones, they must be

cleaned. Otherwise, they will not have the abrasive quality necessary to sharpen.

Clean as follows:

Remove the nuts and take the stones off the shafts.

Soak the stones in a solution of dish soap (i.e. Joy, Dawn, etc.) and water for

one hour.

www.Avantco.com

User Manual

submerge the sharpener

used,

the

sharpening

stones

should