IKEA RENGORA 매뉴얼 - 페이지 10

{카테고리_이름} IKEA RENGORA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA RENGORA 32 페이지. Ikea dishwasher
IKEA RENGORA에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지), 소유자 매뉴얼 (48 페이지), 매뉴얼 (24 페이지), 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (16 페이지), 매뉴얼 (28 페이지), 매뉴얼 (12 페이지), 사용 설명서 (29 페이지), 매뉴얼 (29 페이지)

페이지 인쇄

Product description

2. SWITCH ON THE DISHWASHER

Open the door and press the ON/OFF button.

LOAD THE RACKS (see LOADING THE RACKS)

ENGLISH

FILLING THE DETERGENT DISPENSER

(see PROGRAMS TABLE).

The machine will switch off automatically during certain

CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE

extended periods of inactivity, in order to minimise electri-

Select the most appropriate program in accordance with the

city consumption. If the crockery is only lightly soiled or

• In order to maximize dishwasher efficiency it is

type of crockery and its soiling level (see PROGRAMS

if it has been rinsed with water before being placed in the

recommended to initiate the wash cycle once dishwasher

DESCRIPTION) by pressing the

is fully loaded. Loading the household dishwasher up to

dishwasher, reduce the amount of detergent used accordingly.

the capacity indicated by the manufacturer will contribute to

Select the desired options (see OPTIONS AND FUNCTIONS).

energy and water savings. Information on correct loading of

START

MODIFYING A RUNNING PROGRAM

tableware can be found in Loading chapter. In case of partial

Start the wash cycle by pressing START/Pause button (led

If a wrong program was selected, it is possible to change it, pro-

loading it is recommended to use dedicated wash options

is lit) and closing the door within 4 sec. When the program

vided that it has only just begun: open the door, press and hold

starts you hear a single beep. If the door was not closed within

the ON/OFF button, the machine will switch off.

Daily Use

4sec., the alarm sound will be played. In this case, open the

Switch the machine back on using the ON/OFF button and select

door, press START/Pause button and close the door again

the new wash cycle and any desired options; Start the wash cycle

1. Check water connection

within 4 sec.

by pressing START/Pause button and closing the door within 4 sec.

Check that the dishwasher is connected to the water supply

END OF WASH CYCLE

and that the tap is open.

ADDING EXTRA CROCKERY

The end of the wash cycle is indicated by beeps and by the

2. Switch on the dishwasher

flashing of the wash cycle number on the display. Open the

Without switching off the machine, open the door (START/Pause

Open the door and press the ON/OFF button.

door and switch off the appliance by pressing the ON/OFF

led starts blinking) (be ware of HOT steam!) and place the

3. Load the racks (see LOADING THE RACKS)

button.

crockery inside the dishwasher. Press the START/Pause button

4. Filling the detergent dispenser

Control panel

Wait for a few minutes before removing the crockery - to avoid

(see FILLING THE DETERGENT DISPENSER).

and close the door within 4 sec., the cycle will resume from the

5. Choose the program and customise the cycle

burns. Unload the racks, beginning with the lower one.

point at which it was interrupted.

Select the most appropriate program in accordance with

the type of crockery and its soiling level (see PROGRAMS

ACCIDENTAL INTERRUPTIONS

Functions

DESCRIPTION) by pressing the button

If the door is opened during the wash cycle, or if there is a power

Select the desired options (see FUNCTIONS).

cut, the cycle stops. Press the START/Pause button and close

6. Start

the door within 4 sec., the cycle will resume from the point at

Start the wash cycle by pressing START/Pause button (led

1. ECO - Normally soiled crockery. Standard program, the most efficient in terms of its combined energy and water

going from flicker to lit) and closing the door within 4 sec.

which it was interrupted.

consumption.

When the program starts you hear a single beep. If the door

On-Off/Reset button with indicator light

2. NORMAL - Mixed soil. For normally soiled dishes with dried food residues.

was not closed within 4sec., the alarm sound will be played.

Program selection button

3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used

In this case, open the door, press START/Pause button and

Salt refill indicator ligh

for delicate items).

Rinse Aid refill indicator ligh

close the door again within 4 sec.

Program number and delay time indicator

7. End of wash cycle

4. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.

Tablet indicator light

The end of the wash cycle is indicated by beeps and by the

5. FAST - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.

flashing of the wash cycle number on the display. Open the

6. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform

door and switch off the appliance by pressing the ON/OFF

First use

button.

maintenance of the dishwasher.

Wait for a few minutes before removing the crockery - to

ADVICE REGARDING THE FIRST TIME USE

7. SELF- CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance

avoid burns. Unload the racks, beginning with the lower one.

using hot water.

After installation, remove the stoppers from the racks and the

retaining elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

dishes andon the machine's functional components.

• It is important that the salt reservoir be never empty.

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED � � � �rapidly 3 times

Functions

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the

and beeps will sound. The option will not be enabled.

dishwasher (see PRODUCT DESCRIPTION) and should be

filled when the SALT REFILL indicator light

HALF LOAD

control panel is lit .

If there are not many dishes to be washed, a half

If there are not many dishes to be washed, a half load

load cycle may be used in order to save water,

cycle may be used in order to save water, electricity and

electricity and detergent. Select the program and

detergent. Select the program and press the HALF LOAD

press the HALF LOAD button: the indicator light will

button: the indicator light will light up. Press the HALF

light up. Press the HALF LOAD button to deselect this

LOAD button to deselect this option.

option.

Remember to halve the amount of detergent.

TABLET (Tab)

This setting allows you to optimize the performance

This setting allows you to optimize the performance of

of the program according to the type of detergent

the program according to the type of detergent used.

used.

Press the START/PAUSE button for 3 seconds (the

corresponding symbol will light up) if you use combined

corresponding symbol will light up) if you use

detergents in tablet form (rinse aid, salt and detergent in

combined detergents in tablet form (rinse aid, salt

1 dose).

and detergent in 1 dose).

If you use powder or liquid detergent, this option

should be off.

To adjust the delay time and select a shorter period of time,

press the DELAY button. To cancel it, press the button

repeatedly until the selected delayed start indicator light

«h» switches off.

The DELAY function cannot be set once a wash cycle

has been started.

button.

3 4

if it has been rinsed with water before being placed in the

dishwasher, reduce the amount of detergent used accordingly.

MODIFYING A RUNNING PROGRAM

If a wrong program was selected, it is possible to change it, pro-

vided that it has only just begun: open the door, press and hold

the ON/OFF button, the machine will switch off.

Switch the machine back on using the ON/OFF button and select

(Half load), fiilling up only selected racks. Incorrect loading or

overloading the dishwasher may increase resources usage

the new wash cycle and any desired options; Start the wash cycle

(such as water, energy and time, as well as increase noise

by pressing START/Pause button and closing the door within 4 sec.

level), reducing cleaning and drying performance.

• Manual pre-rinsing of tableware items leads to increased

ADDING EXTRA CROCKERY

water and energy consumption and is not recommended.

Without switching off the machine, open the door (START/Pause

led starts blinking) (be ware of HOT steam!) and place the

crockery inside the dishwasher. Press the START/Pause button

and close the door within 4 sec., the cycle will resume from the

point at which it was interrupted.

The machine will switch off automatically during certain

extended periods of inactivity, in order to minimise

ACCIDENTAL INTERRUPTIONS

electricity consumption. If the crockery is only lightly soiled

If the door is opened during the wash cycle, or if there is a power

or if it has been rinsed with water before being placed in the

cut, the cycle stops. Press the START/Pause button and close

dishwasher, reduce the amount of detergent used

the door within 4 sec., the cycle will resume from the point at

accordingly.

which it was interrupted.

Modifying a running program

If a wrong program was selected, it is possible to change it,

provided that it has only just begun: open the door, press and

hold the ON/OFF button, the machine will switch off.

Switch the machine back on using the ON/OFF button and select

the new wash cycle and any desired options; Start the wash

cycle by pressing START/Pause button and closing the door

within 4 sec.

6 7 8

Adding extra crockery

Display

Without switching off the machine, open the door (START/

Half Load indicator light

Pause led starts blinking) (be ware of HOT steam!) and place the

Half Load button

crockery inside the dishwasher. Press the START/Pause button

10. Delay button

and close the door within 4 sec., the cycle will resume from the

11. START/Pause button with indicator light / Tab

point at which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a

power cut, the cycle stops. Press the START/Pause button and

close the door within 4 sec., the cycle will resume from the point

at which it was interrupted.

ENGLISH

in the

DELAY

The start time of the program may be delayed for a

The start time of the program may be delayed for a period

period of time between 1 and 12 hours.

of time between 1 and 12 hours.

1. Press the DELAY button: the corresponding «h»

1. Press the DELAY button: the corresponding «h» symbol

appears on the display; each time you press the button,

the time (1h, 2h, etc. up to max. 12h) from the start of

the selected wash cycle will be increased.

2. Select the wash program, press the START/PAUSE

button and within 4 seconds close the door: the timer

will begin counting down.

3. Once this time has elapsed, the indicator light «h»

switches off and the wash cycle begins.

To adjust the delay time and select a shorter period of time,

press the DELAY button. To cancel it, press the button

repeatedly until the selected delayed start indicator light

«h» switches off.

The DELAY function cannot be set once a wash

The DELAY function cannot be set once a wash cycle

cycle has been started.

has been started.

1. Go to the Dishwasher software menu pressing and holding

button (6 sec).

2. You switched to NaturalDry Control Menu, you could change

status of NaturalDry functionality by pressing

– enabled

To confirm the change and exit from the Control Menu please

press and hold

Eco

Upper rack

� � � � � � �

Upper rack height adjuster

Upper sprayer arm

Lower rack

Cutlery basket

Lower sprayer arm

Filter Assembly

Salt reservoir

10. Detergent and Rinse Aid dispensers

11. Rating plate

12. Control panel

3sec

1. Remove the lower rack and

unscrew the reservoir cap

(anticlockwise).

2. Only the first time you do this: fill

the salt reservoir with water.

3. Position the funnel (see figure)

and fill the salt reservoir right up

to its edge (approximately 1 kg);

it is not unusual for a little water to

leak out.

4. Remove the funnel and wipe any

salt residue away from the

TABLET (Tab)

opening.

This setting allows you to optimize the performance of

the program according to the type of detergent used.

Press the START/PAUSE button for 3 seconds (the

symbol appears on the display; each time you

corresponding symbol will light up) if you use combined

press the button, the time (1h, 2h, etc. up to max.

detergents in tablet form (rinse aid, salt and detergent in

12h) from the start of the selected wash cycle will

be increased.

1 dose).

If you use powder or liquid detergent, this option

button and within 4 seconds close the door: the

should be off.

timer will begin counting down.

switches off and the wash cycle begins. To adjust

the delay time and select a shorter period of time,

press the DELAY button. To cancel it, press the

button repeatedly until the selected delayed start

indicator light «h» switches off.

Program

– disabled

button (3 sec).

Availab

button:

options

50°

Doo

whi

ens

the

add

tion

Nat

1. G

2. Y

To c

pre