Avantco SL512 사용자 설명서 - 페이지 5
{카테고리_이름} Avantco SL512에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco SL512 7 페이지. Meat slicer
Avantco SL512에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지)
페이지 인쇄
Blade Sharpening
1. This operation should be undertaken if the cutting blade becomes dull. It should be noted that the blade is made
from hardened material and under normal use should only need sharpening once a year.
2. Unplug the unit.
3. Ensure that the slice thickness knob is in the '0' position.
4. CAREFULLY clean the part of the blade to be sharpened.
5. Unlock the sharpening device using the safety locking screw. Lift up the sharpening assembly and rotate it 180° so
that both grinding wheels are in the correct position. Lower the sharpening device and lock in position.
6. Plug in the machine and switch on.
7. Using the button at the rear of the sharpening unit, push the stone against the rotating blade for approximately
30 seconds.
8. After sharpening, it is important to remove the grinding wheel from the blade by letting go of the push button on the
front of the sharpening device. Run the slicer for 2-3 seconds after letting go of this button.
9. Return the sharpening device to its original position by unlocking the safety screw and rotating by 180°.
Electrical Connection Information
Electrical Connection Information
Model
Description
SL309
Avantco Slicer 9"
SL310
Avantco Slicer 10"
SL312
Avantco Slicer 12"
SL512
Avantco Slicer 12" Medium Duty
Technical Specification
Model
Blade Dia.
SL309
9"
SL310
10"
SL512
12"
SL312
12"
www.AvantcoEquipment.com
Blade Rotation
Cut Thickness
Speed
532 rpm
0 - 0.4"
465 rpm
0 - 0.4"
300 rpm
0 - 0.6"
428 rpm
0 - 0.6"
User Manual
Volts /HZ
HP
120 / 60
1/4 HP
120 / 60
1/4 HP
120 / 60
1/3 HP
120 / 60
1/2 HP
Cut Capacity
Net Weight
6.3 x 7.5"
29lbs
6.7 x 7.5"
32lbs
9.3"x 6"
64lbs
9.4x 6"
54lbs
Watts
Plug Type
200 W
NEMA 5-15P
320 W
NEMA 5-15P
420 W
NEMA 5-15P
450 W
NEMA 5-15P
Operating Noise
Level
60-67 dB(A)
5