GAPOSA XQ40 매뉴얼 - 페이지 9
{카테고리_이름} GAPOSA XQ40에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA XQ40 15 페이지. Tubular motors with encoder electronic limits
GAPOSA XQ40에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 지침 (4 페이지), 사용 설명서 (13 페이지), 매뉴얼 (16 페이지)
페이지 인쇄
PROGRAMMING
CHECKING/CHANGING DIRECTION
IMPORTANT: change direction must be performed before starting limit
setting otherwise limits must be reset.
Press UP or DOWN the motor should go UP or DOWN, otherwise to change
direction:
Press and hold the PROG-TX
1
button until the motor starts
moving
Press STOP: The motor makes a
2
brief jog. Direction of the motor
has been reversed.
ERASING TRANSMITTER
Push simultaneously the PROG-TX
button and STOP of the transmitter until
the motor makes a brief movement in
both directions.
Only the transmitter used for this
procedure has been deleted from motor
memory.
3/4