GAPOSA XQ40 사용 설명서 - 페이지 5

{카테고리_이름} GAPOSA XQ40에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA XQ40 13 페이지. Tubular motors with encoder electronic limits
GAPOSA XQ40에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 지침 (4 페이지), 매뉴얼 (15 페이지), 매뉴얼 (16 페이지)

페이지 인쇄

INSTALLATION

The fixing bracket

frame so that the roller tube

height not less than 1,8m.

[FOR XQ50] Place the motor square pin

the cap at the opposite end of the tube on the fixing plate.

WARNING: Never hit on the head of the motor (D) when you

insert it into the tube.

NOTES

• For the XQ50, with torque up to 15Nm, the minimum tube diameter

is 50x1,5mm; for motors with higher torques, the minimum tube

diameter is 60x1,5mm.

• For the XQ60, the minimum tube diameter is 63x1,5mm.

WARNING:

• The screws used to fix the last slat on the tube may be too long

and reach the tubular part of the motor. Use appropriate screws or

fixing clips.

• Motor moving parts installed under 2,5m from the ground must be

protected.

• A wrong motor installation can damage persons or objects.

must be fixed inside the box or on the awning

9 0 °

is perfectly horizontal and at a

on the bracket

2/2

and