IKEA VALGJORD 사용자 설명서 - 페이지 13

{카테고리_이름} IKEA VALGJORD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA VALGJORD 28 페이지.
IKEA VALGJORD에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지)

IKEA VALGJORD 사용자 설명서
ENGLISH
Use of rinse aid and multi-tablets
The factory setting of the rinse aid
dispenser is with the dispenser activated.
This means that the rinse aid dispenser
always releases rinse aid.
It is possible to deactivate the rinse aid
dispenser only if the option Multitab is
activated, in this case the dispenser will not
release rinse aid.
If the dispenser is deactivated and Multitab
option is not selected, the dispenser will still
release rinse aid according to the level set
(see "How to set the rinse aid level").
The use of the option Multitab with the rinse
aid dispenser deactivated may not give
satisfying drying results.
When the rinse aid dispenser is
deactivated, the rinse aid indicator is
always off when the option Multitab is
activated.
How to deactivate the rinse aid dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start to flash and the display is blank.
2. Press
.
• The indicators
off.
• The indicator
flash.
• The display shows the current setting:
= the rinse aid dispenser is
activated (factory setting).
3. Press
to change the setting.
and
until
,
,
and
,
and
continues to
= the rinse aid dispenser is
deactivated.
4. Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is activated but it
is possible to deactivate it.
How to deactivate the acoustic signal for
the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
go off.
• The indicator
• The display shows the current setting:
= Acoustic signal on.
3. Press
= Acoustic signal off.
go
4. Press the on/off button to confirm the
setting.
and
,
,
,
continues to flash.
to change the setting.
13
until
and
and