GAPOSA XQ60 사용 설명서 - 페이지 5

{카테고리_이름} GAPOSA XQ60에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA XQ60 13 페이지. Tubular motors with mechanical limit switch and integrated receiver.
GAPOSA XQ60에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 지침 (4 페이지), 매뉴얼 (15 페이지), 매뉴얼 (13 페이지), 매뉴얼 (16 페이지), 사용 설명서 (8 페이지)

페이지 인쇄

INSTALLATION

The fixing bracket

frame so that the roller tube

height not less than 1,8m.

[FOR XQ50] Place the motor square pin

the cap at the opposite end of the tube on the fixing plate.

WARNING: Never hit on the head of the motor (D) when you

insert it into the tube.

NOTES

• For the XQ50, with torque up to 15Nm, the minimum tube diameter

is 50x1,5mm; for motors with higher torques, the minimum tube

diameter is 60x1,5mm.

• For the XQ60, the minimum tube diameter is 63x1,5mm.

WARNING:

• The screws used to fix the last slat on the tube may be too long

and reach the tubular part of the motor. Use appropriate screws or

fixing clips.

• Motor moving parts installed under 2,5m from the ground must be

protected.

• A wrong motor installation can damage persons or objects.

must be fixed inside the box or on the awning

9 0 °

is perfectly horizontal and at a

on the bracket

2/2

and