GAPOSA XQ60 매뉴얼 - 페이지 12
{카테고리_이름} GAPOSA XQ60에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA XQ60 13 페이지. Tubular motors with mechanical limit switch and integrated receiver.
GAPOSA XQ60에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 지침 (4 페이지), 매뉴얼 (15 페이지), 사용 설명서 (13 페이지), 매뉴얼 (16 페이지), 사용 설명서 (8 페이지)
페이지 인쇄
SETTING THE LIMITS
SWITCHES
After installation and before fixing the shutter/awning at the
tube, activate the motor downwards until it stops.
1
ATTENTION: Check that the motor/tube turns in the right
direction.
Turn the lower screw to
so that the tube reaches
2
the best position for its
connection with the shutter/
awning.
Fixing the shutter/awning
at the tube and then turn
the lower adjusting screw
3
to
or
the exact desired "down"
position.
Open the shutter/roll up
the awning until it does not
stop and then turn the upper
4
screw to
awning reaches the exact
desired "up" position.
In case you need to correct the "up" limit position, because it's
over, close the shutter/roll the awning down) shortly, then turn
the upper adjusting screw to . Repeat then the sequences from
point 3.
in order to set
till the shutter/
2/2