GAPOSA QC100 사용 설명서 - 페이지 9

{카테고리_이름} GAPOSA QC100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA QC100 16 페이지. Single-phase control unit

INTEGRATED COURTESY LIGHT

The courtesy lamp contact will activate ifself, after an opening input,

once the door is completely closed and the operation time over.

The contact of the courtesy light has two working modes:

• switch on in case of opening and authomatical switch off after 3

minutes

• switch on for two seconds while opening (useful to operate a lighting

system).

In order to switch from one mode to the other, please move the dip 2 on

ON and then on OFF for at least three times

NOTE: you should move consecutively from OFF to ON within 2

seconds, otherwise the number of movements will be reset to

zero).

The leds will inform you about the selected mode:

• Activation of mode 3 minutes: green led ON, red led flashing slowly for

3 seconds

• Activation of mode 2 seconds: green led ON, red led flashing quickly for

3 seconds

In case the courtesy light is matched with a radio code, the transmission

of the command will cause the activation of the relé for 3 minutes

or 2 seconds according to the control unit programming. In case of

transmission of the command with active relé, it will be deactivated.

Max 5 A

230 V

50-60 Hz