GAPOSA Emitto Smart 16 QCTZ16Y 설치 관리자 매뉴얼 - 페이지 6

{카테고리_이름} GAPOSA Emitto Smart 16 QCTZ16Y에 대한 설치 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA Emitto Smart 16 QCTZ16Y 8 페이지.

AUTOMATIC SETTING OF THE LIMITS

(Just for motors with electronic limit switch)

For limits set with torque sensor ( mechanical stop of shutters or cassette awnings/shades), press and

hold

UP button until the bottom bar hits the cassette or shutter box.

A short jog will indicate that the UP position has been memorized. The same procedure can be followed

for DOWN limit but only for roller shutters.

INTERMEDIATE POSITION SETUP (Fig. 7)

(Just for motors with electronic limit switch)

Stop the shutter/awning in the desired intermediate position, then press simultaneously the UP and

DOWN buttons until the motor makes a brief movement in both directions.

The intermediate position has been setup.

FIG. 7

The factory reset will un-hide any hidden channels and delete all custom groups.

1. Remove the battery cover on the back of the transmitter.

2. Remove the battery.

3. Press and hold the circle button

displays,

will appear and the circle button

4. After about 3 seconds the transmitter will start up and all channels will be un-hidden, and any groups

deleted.

88:888

while reinserting the battery, once the screen comes back on and

can be released.