GAPOSA SileoXS XSDC3ED228 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} GAPOSA SileoXS XSDC3ED228에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA SileoXS XSDC3ED228 8 페이지. Ultra quiet motorization
페이지 인쇄1. INSTALLATION
1
Check that the inner diameter of the tube is
greater than 25mm.
3
Measure the length (L) between the inner edge of
the motor head and the edge of the motor drive
wheel.
5
Slide the motor into the roller tube
7
Screw the bracket interface on to the motor head
Ø > 25mm
L
2
A
Insert the adaptors that will fit the roller tube:
insert the crown (A) and the motor drive wheel (B)
on the motor.
WARNING: for some of the smaller tubes, you
need to remove the stock bushing to install the
appropriate crown (A).
4
Cut and deburr the roller tube to the required
length and remove the swarf.
6
Slide the end cap into the roller tube and lock it if
necessary
8
Mount motorized tube onto brackets
B
3