GAPOSA SileoXS XSDC3EX226BC 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} GAPOSA SileoXS XSDC3EX226BC에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA SileoXS XSDC3EX226BC 8 페이지. Ultra quiet motorization
4 XSDC3EX030W
WARNING: The internal regulator
works up to 15VCC
3. SLEEP MODE
Sleep mode is a status which prevents a motor from moving during shipping or assembling:
Wake up the motor: click the push button on the head of the motor
the motor makes 1 jog
Activate sleeping mode: click the push button on the head of the motor
Note: any short press of the button on the head of the motor will either wake up the
motor or activate sleeping mode sequentially.
ATTENTION: In an installation of more than one XSDC battery motors wake up one
motor at a time in order to pair it to its own transmitter.
4. TRANSMITTERS
UP
STOP
DOWN
A
PROG-TX
Program the transmitter
B
PROG-FC
Set the limit switch
5. PROGRAMMING TRANSMITTERS
1
Press and hold the PROG-TX button
(on the back of transmitter or on the
head of the motor)until the motor
starts moving
Power operated motor 12VCC
(only for Li-Ion integrated battery motor)
the motor makes 2 jogs
QCT..01
2
Check the motor rotation then
release the PROG-TX button (the
motor stops)
Antenna
Black wire
QCT..02
QCT..03
3
Power cable
right wire
Positive +
Push- button
QCT..04
A
Within 5 seconds, press the
corresponding button (UP if the
motor turns upwards or DOWN if
the motor turns downwards).
Transmitter is now programmed.
B
5