Makita 0088381760386 사용 설명서 - 페이지 6
{카테고리_이름} Makita 0088381760386에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 0088381760386 11 페이지. Cordless heat gun
페이지 인쇄
ASSEMBLY
Attaching and detaching
accessories
The heat gun can use with accessory or without the
accessories according to various of heating purpose.
Attaching the accessory
—
Choose the appropriate nozzle according to the
heating applications.
—
Push the fitting end of the nozzle onto the heating
nozzle.
MOUNTING THE CORRECT
ACCESSORY (IF APPLICABLE)
Shape and
description
Glass protection
Drying the putty on the window flame
nozzle
Removing putty from the window frame
Protect windows
with the scraper (optional accessory)
when stripping
frames
Wide-slot nozzle
Heat packaging for heat shrink films
For heating spread
over wider area
Reflector nozzle
Heat shrinking for heat shrink tubes
Bending of resin tube
Reduction nozzle
Paint stripping with the scraper (optional
For heating concen-
accessory)
trated over small
area
Example
6 ENGLISH
Shape and
description
Overlap welding
Patching a vinyl sheet with the pressure
nozzle
roller (optional accessory)
(Optional
accessory)
Solder sleeves
Heat shrinking for heat shrink tubes
reflector
(Optional
accessory)
Welding nozzle
For heating concentrated over small
(Optional
area
accessory)
WARNING:
Ensure the power tool is switched
off and battery cartridge is removed from the
power tool before attaching the accessories.
Attaching the accessories with switch on or battery
cartridge attached may cause the risk of accidents.
WARNING:
Make sure to attach the accesso-
ries securely. Otherwise the accessory may fall off
accidently and cause burn injury.
Detaching the accessory
Turn the front cover in the direction of the arrow in the
illustration, the accessory will be ejected. This allows
you to remove nozzles without touching them while they
are still hot.
Fig.2
Example