KitchenAid KUDK01IL 소비자 참조 매뉴얼 - 페이지 8
{카테고리_이름} KitchenAid KUDK01IL에 대한 소비자 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KUDK01IL 20 페이지. Undercounter dishwasher
KitchenAid KUDK01IL에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (19 페이지), 사용 및 관리 매뉴얼 (19 페이지)
페이지 인쇄
For Model KUDI01FL
1. Carefully open the door slightly to stop the cycle. Wait for the
spraying action to stop before opening the door to gain
access to the control panel.
2. Press CANCEL. Cancel glows.
3. Close the door. The dishwasher starts a 2-minute drain (if
needed). Let the dishwasher drain completely.
To stop the drain
You can press CANCEL again to stop the drain. Remember to
drain the dishwasher before starting a new cycle.
To clear the indicators
Press CANCEL before starting the dishwasher to clear all options
and cycles.
Changing a Cycle or Setting
For Model KUDI01IL
During the first minute of a cycle
Press a new cycle and/or options.
After the first minute of a cycle
1. Press CANCEL. Cancel glows. The dishwasher starts a
2-minute drain (if needed). Let the dishwasher drain
completely.
2. Check the detergent dispensers. If the main wash cup has
opened and the detergent washed away, refill the cups as
needed.
3. Close the door.
4. Press a new cycle and/or options.
5. Press START.
8
For Model KUDI01DL
During the first minute of a cycle
1. Open the door.
2. Press a new cycle and/or options.
3. Check the detergent dispensers. They must be filled properly
for the new cycle.
4. Close the door. The dishwasher resumes the new cycle
and/or option after a 5-second pause.
After the first minute of a cycle
1. Press the Cancel pad.
The display shows
Your dishwasher starts a 2-minute drain (if needed). Let
the dishwasher drain completely. The light turns off after
2 minutes.
NOTE: If your dishwasher does not need draining, the light
turns off.
2. Open the door.
3. Select a new cycle and/or options.
4. Check the detergent dispensers. They must be filled properly
for the new cycle.
5. Close the door.
6. Press the Start pad.
For Model KUDI01FL
During the first minute of a cycle
1. Open the door.
2. Press a new cycle and/or options.
3. Check the detergent dispensers. They must be filled properly
for the new cycle.
4. Close the door. The dishwasher resumes the new cycle
and/or option after a 5-second pause.
After the first minute of a cycle
1. Carefully open the door slightly to stop the cycle. Wait for the
spraying action to stop before opening the door to gain
access to the control panel.
2. Press CANCEL. Cancel glows.
3. Close the door. Your dishwasher starts a 2-minute drain (if
needed). Let the dishwasher drain completely.
4. Select a new cycle and/or options.
5. Press START.
6. Check the detergent dispensers. They must be filled properly
for the new cycle.
7. Close the door.