Avantco 178SS1F2HC 사용자 설명서 - 페이지 7

{카테고리_이름} Avantco 178SS1F2HC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 178SS1F2HC 9 페이지. Reach-in refrigerators and freezers
Avantco 178SS1F2HC에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

페이지 인쇄

Warning

• Do not attempt to remove or repair any component unless instructed by factory.

• Make sure that the unit is not resting on or against the electrical cord and plug.

• To minimize personal injury, do not hang on the doors.

• Do not store any flammable and explosive gas or liquids inside the unit.

• Do not attempt to alter or tamper with the electrical cord.

Operation & Maintenance

DISCONNECT POWER CORD BEFORE CLEANING ANY PARTS OF THE UNIT.

It is strongly recommended that any servicing of the unit be performed by an authorized

service technician.

Loading the Product

• Make sure there is at least four inches of clearance from the evaporator.

• Ensure all shelves are sitting level and properly secured before loading products.

• Do not store flammable and explosive gas or liquids inside the unit.

Cleaning the Fan Blades and Motor

• If necessary, clean the fan blades and motor with a soft cloth.

• If it is necessary to wash the fan blades, cover the fan motor to prevent moisture damage.

Cleaning the Interior of the Unit

• When cleaning the cabinet interior, use a solvent of warm water and mild soap.

• Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the

interior finish.

• Wash door gaskets on a regular basis, preferably weekly. Simply remove door gasket from

the frame of the door, soak in warm water and soap for thirty (30) minutes, dry with soft cloth,

and replace.

• Check door gaskets for proper seal after they are replaced.

• Periodically remove the shelves and pilasters from the unit and clean them with mild soap and

warm water. To remove the pilasters, first remove the shelves and shelf brackets. Then, simply lift

the pilaster up and out.

User Manual

SS Series Reach-In Refrigerators and Freezers