ALIBI ali-ipu30 series 빠른 설치 매뉴얼 - 페이지 2
{카테고리_이름} ALIBI ali-ipu30 series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALIBI ali-ipu30 series 5 페이지. Ip bullet camera
페이지 인쇄In the screen shown above, an ALI-IPU3030R camera was discovered. This camera, although
installed on a subnet other than the one implied by its IP address is shown, is still found by the tool.
5.
To change the network settings of the camera to be compatible with the subnet where it is installed,
do the following:
a.
Click the device to highlight it. Notice that the network parameters are populated in the frame
on the right.
b.
Modify the network settings to values compatible with the subnet where it is installed.
c.
Enter the admin password for the device in the password field. By default, the admin user
password for Alibi cameras is 1111.
d.
Click the Save button. The new IP address, port, etc. settings will appear in the list with the
device you modified.
www.observint.com
2
6.
Close the Alibi Discover Tool by clicking the Close icon (
Step 4.
Remote login
To access the camera from a computer on the LAN:
1.
Open your Microsoft Internet Explorer browser on your compute and enter the IP address of the
camera in the URL field. In the example below, the IP address of the camera is 192.168.75.76.
2.
In the login window, enter your User Name and Password in the appropriate fields, then click
Login. The default User Name and Password for Alibi cameras is admin and 1111.
3.
If this is the first time you are logging into a camera at this IP address AND you are using Internet
Explorer 10 or newer, you must configure it for Compatibility mode:
a.
In Internet Explorer, click the Tools icon (located to the right of the tabs), then select
Compatibility View settings from the drop-down menu.
) in the upper-right corner of the screen.
T
© 2014 Observint Technologies. All rights reserved.