Makita 0088381898102 사용 설명서 - 페이지 8

{카테고리_이름} Makita 0088381898102에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 0088381898102 17 페이지.

페이지 인쇄

This tool has a reversing switch to change the direction of rota-

tion. Depress the reversing switch lever from the A side for clock-

wise rotation or from the B side for counterclockwise rotation.

When the reversing switch lever is in the neutral posi-

tion, the switch trigger cannot be pulled.

Changing the application mode

Changing the impact force

You can change the impact force in four steps: 4 (max), 3 (hard), 2 (medium), and 1 (soft).

This allows a tightening suitable to the work.

The level of the impact force changes every time you press the button

You can change the impact force within approximately one minute after releasing the switch trigger.

NOTE: You can extend the time to change the impact force approximately one minute if you press the button

Application mode

(Impact force grade

displayed on panel)

4 (Max)

3 (Hard)

2 (Medium)

1 (Soft)

: The lamp is on.

Maximum blows

-1

4,000 min

(/min)

Tightening with the maximum force

and speed.

-1

3,400 min

(/min)

Tightening with less force and speed

than Max mode (easier to control than

Max mode).

-1

2,600 min

(/min)

Tightening when a good finishing is

needed.

-1

1,800 min

(/min)

Tightening with less force to avoid

screw thread breakage.

Purpose

8 ENGLISH

Example of application

Assembling steel frames and tighten-

ing long screws or bolts.

Assembling steel frames.

Assembling or disassembling scaf-

folds and frameworks.

Assembling furniture.