Jamara CCX Pro 사용 설명서 - 페이지 11

{카테고리_이름} Jamara CCX Pro에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Jamara CCX Pro 20 페이지. 2,4 ghz
Jamara CCX Pro에 대해서도 마찬가지입니다: 지침 (12 페이지), 지침 (12 페이지), 지침 (12 페이지), 지침 (4 페이지), 사용 설명서 (16 페이지)

Jamara CCX Pro 사용 설명서
Empfänger
Empfänger
Receiver
o

Fail Safe

LED
Akku
Akku
Battery
Battery
Bindungsstecker
Bindungsstecker
Binding Plug
Binding Plug
Fail Safe
Programming of the integrated FailSafe unit.
1. Function Description
The built-in FailSafe unit is mainly for the use on boats and cars. It is
used to prevent loss of the model in case of signal loss and returns the
servo to the position which was set before.
2. Setting
a. Turn on the transmitter
b. Turn on the receiver. The signal LED will fl ash continuously and
indicates that the receiver is ready.
c. Move the throttle lever on the transmitter in the braking or
outlet position. Hold the throttle lever in this position.
d. Press the Setup button on the receiver. The signal LED fl ashes for
3 seconds (see left).
e. The setting is saved and you can bring back the throttle into
neutral position.
3. Testing the settings
a. Turn on the transmitter.
b. Turn on the receiver.
c. Turn off the transmitter.
d. The receiver will now lose the signal and drives the servo or the
speed control on the gas channel to the previously programmed
position.
e. If these steps work, you have set the FailSafe.
11
11