Makita 1911B 사용 설명서 - 페이지 5

{카테고리_이름} Makita 1911B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 1911B 12 페이지. Power planer
Makita 1911B에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (16 페이지), 사용 설명서 (13 페이지), 사용 설명서 (18 페이지)

페이지 인쇄

FUNCTIONAL DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and

•

unplugged before adjusting or checking function on

the tool.

Adjusting depth of cut

001603

Depth of cut may be adjusted by simply turning the knob

on the front of the tool.

Switch action

CAUTION:

Before plugging in the tool, always check to see

•

that the switch trigger actuates properly and returns

to the "OFF" position when released.

For tool without lock button and lock-off button

004882

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For tool with lock button

004885

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

1. Knob

1. Switch trigger

1. Lock button /

Lock-off button

2. Switch trigger

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

For tool with lock-off button

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided.

To start the tool, depress the lock-off button and pull the

switch trigger. Release the switch trigger to stop.

ASSEMBLY

CAUTION:

Always be sure that the tool is switched off and

•

unplugged before carrying out any work on the tool.

Removing or installing planer blades

001605

CAUTION:

Tighten the blade installation bolts carefully when

•

attaching the blades to the tool. A loose installation

bolt can be dangerous. Always check to see they

are tightened securely.

Handle the blades very carefully. Use gloves or

•

rags to protect your fingers or hands when

removing or installing the blades.

Use only the Makita wrench provided to remove or

•

install the blades. Failure to do so may result in

overtightening or insufficient tightening of the

installation bolts. This could cause an injury.

To remove the blades on the drum, unscrew the

installation bolts with the socket wrench. The drum cover

comes off together with the blades.

To install the blades, first clean out all chips or foreign

matter adhering to the drum or blades. Use blades of the

same

dimensions

oscillation/vibration will result, causing poor planing

action and, eventually, tool breakdown.

001606

1. Socket wrench

2. Installation bolt

and

weight,

1. Bolt

2. Drum

3. Planer blade

4. Drum cover

5. Adjust plate

drum