Makita 1923B 사용 설명서 - 페이지 8

{카테고리_이름} Makita 1923B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 1923B 17 페이지. 82 mm (3-1/4”)
Makita 1923B에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지)

Adjusting depth of cut

Depth of cut may be adjusted by simply

turning the knob on the front of the tool.

Switch action

To start the tool, simply pull the trigger.

Release the trigger to stop. For continuous

operation, pull the trigger and then push in

the lock button. To stop the tool from the

locked position, pull the trigger fully, then

release

it.

Lock button

Trigger

switch

CAUTION :

Before plugging in the tool, always check to see that the trigger switch actuates properly

and returns to the "OFF" position when released.

Planing operation

First, rest the tool front base flat upon the

workpiece surface without the blades mak-

ing any contact. Switch on and wait until

the blades attain full speed. Then move the

tool gently forward. Apply pressure on the

front of tool a t the start of planing, and

a t

the back

a t

the end of planing. Planing will

be easier if you incline the workpiece in

stationary fashion,

that you can plane

somewhat downhill. The speed and depth

of cut determine the kind of finish. The

power planer keeps cutting

a t a

speed that

will not result in jamming by chips. For rough cutting, the depth of cut can be increased,

while for a

good

finish you should reduce the depth of cut and advance the tool more

slowly.