Avantco 177MX20SHRDR 사용자 설명서 - 페이지 8
{카테고리_이름} Avantco 177MX20SHRDR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 177MX20SHRDR 8 페이지. Slicer & shredder attachment for 177mx20 & other mixers with #12 hub
페이지 인쇄
User Manual
Troubleshooting
CAUTION: Review all safety notes and disconnect the electrical power supply
to the equipment before attempting corrective measures .
TROUBLE
Attachment cannot be
installed onto the mixer hub
Knife or plate scraping
front housing
Mounted unit rattles when
under power
Feed plate scraping plates
8
POSSIBLE CAUSE
Hub shaft is in let-in position
Thrust bearing loose
Lock pin not fully engaged
Thumbscrew or securing
mechanism is loose or missing
Feed plate is out of adjustment
SOLUTION
Rotate mixer's shaft slowly until
it can be inserted
Tighten thrust bearing
Make sure the lock pin is
properly engaged
Tighten or replace thumbscrew
Adjust feed plate with
adjusting screw