Avantco 177MX20SHSL 사용자 설명서 - 페이지 6

{카테고리_이름} Avantco 177MX20SHSL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 177MX20SHSL 8 페이지. Slicer & shredder attachment for 177mx20 & other mixers with #12 hub

페이지 인쇄

User Manual

Loading Attachment onto #12 Hub

1. Before mounting the unit, make sure that the power source is turned off.

2. Carefully lift the assembled unit (Fig. 11) and insert the square milled shaft end into the hub while turning

the unit to engage the square end on the shaft with the square hole in the adapter.

3. Slide the unit forward and push the unit fully forward on to the hub.

4. Tighten the thumbscrew to secure the unit to the hub. (Fig. 12)

5. The vegetable slicer attachment is now ready to process product.

How to Adjust Thickness

1. Either before install or after install, the plate

can be adjusted (Fig. 13) to slice product to

different thicknesses by turning the adjusting

plastic knob as shown. (Fig. 14)

Operation Instructions

1. Connect the electrical supply to the power source equipment, turn the

power source equipment on.

2. Lift the feed plate to expose the processing plate unit and drop product

into the feed hopper. (Fig. 15)

3. Keep hands and fingers out of the hopper.

4. With the feed plate, gently push the product into the rotating plate unit.

Fig. 11

Fig. 13

Fig. 15

Fig. 12

Fig. 14