Makita 1923H 사용 설명서 - 페이지 6

{카테고리_이름} Makita 1923H에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 1923H 17 페이지. Power planer
Makita 1923H에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (18 페이지)

페이지 인쇄

ASSEMBLY

1. Bolt

2. Drum

3. Planer blade

4. Drum cover

5. Adjusting plate

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

carrying out any work on the tool.

Removing or installing planer blades

CAUTION:

•

Tighten the blade installation bolts carefully when attaching the blades to

the tool. A loose installation bolt can be dangerous. Always check to see

they are tightened securely.

•

Handle the blades very carefully. Use gloves or rags to protect your

fingers or hands when removing or installing the blades.

•

Use only the Makita wrench provided to remove or install the blades.

Failure to do so may result in overtightening or insufficient tightening of

the installation bolts. This could cause an injury.

For tool with standard planer blades

004886

To remove the blades on the drum, unscrew the installation bolts with the

socket wrench. The drum cover comes off together with the blades.

To install the blades, first clean out all chips or foreign matter adhering to the

drum or blades. Use blades of the same dimensions and weight, or drum oscil-

lation/vibration will result, causing poor planing action and, eventually, tool

breakdown.

Place the blade on the gauge base so that the blade edge is perfectly flush

with the inside edge of the gauge plate. Place the adjusting plate on the blade,

then simply press in the heel of the adjusting plate flush with the back side of

the gauge base and tighten two screws on the adjusting plate. Now slip the

002555

heel of the adjusting plate into the drum groove, then fit the drum cover on it.

Tighten all the installation bolts evenly and alternately with the socket wrench.